There is leaking from the connection between the T-adapter and the water supply inlet of the toilet.
1. Connect the T-adapter to the water supply inlet of the toilet, make sure the t-adapter is secured firmly (cannot rotate freely) after tightening
2. Make sure that the rubber washer is properly located inside the nut with the narrow side upward.
There is leaking from the connection between the hose and the control unit.
Make sure that the black rubber gasket is on the hose.
The nozzle cannot extend out of the guard.
1.Reinstall the bidet and adjust the position of the bidet to ensure that the nozzle can extend fully.
2.Make sure the water supply is turned on.
The front of the toilet seat cannot be closed.
ensure the nozzle is centered and close to the toilet rim.
